HOW
TO
Directions for setting up the inflatable movie screen:
Remove inflatable unit from bag, lay out with the plastic clips facing up, and fan blowers on the bottom on an area that is flat and clear.
Plug cord into outlet to inflate.
Attach the white screen to the inflatable unit by connecting the clips.
With 2 people, stand the inflatable screen upright and move to the desired location.
Secure the movie screen using the provided tethers and stakes to the ground.
(Sand bags will be provided if there is no dirt ground to secure the screen to.)
Directions for tearing down the inflatable movie screen:
Remove secured tethers from the ground or sand bags.
With 2 people, place the movie screen horizontal on the ground. Unclip the white screen, fold, and place in the bag.
Unplug the cord and wait until the unit is deflated.
Fold the unit from the top to the bottom and then roll from one side to the other. Place the unit in the bag.
Directions for setting up the framed movie screen:
Remove the frames from the bag and lay them out on a flat and clear area.
Align the letters on the tubes with the corresponding tube to ensure proper assembly. (A to A, B to B, etc…)
Connect tubes together.
Unfold the screen making sure that the logo is on the bottom center facing forward.
Starting at the top, attach the clips over the tubes. It’s easiest to start at a corner and wor around.
With 2 people, stand the assembled screen upright and move to the desired location.
Stake the screen frame to the ground using the 4 stakes provided.
Using the supplied guy wires and stakes, secure the frame to the ground.
(Sand bags will be provided if there is no dirt ground to secure the screen to.)
Directions for tearing down the framed movie screen
Remove stakes and secured guy wires from the ground or sand bags.
Using 2 people, place the movie screen horizontal on the ground. Unclip the screen. Fold from top to bottom, then side to side, and place in it’s bag.
Disconnect the tubes and put them in the carry bag.